How To Install Rear Seat On Ezgo Golf Cart

How to Detach a Golf Cart Axle

by Bob White

Digital Vision./Digital Vision/Getty Images

The golf cart was invented in 1962 by Merlin 50. Halvorson. The golf cart allows golfers a more relaxing way of getting effectually the course verses walking and conveying their clubs. Like all mechanical devices, golf game carts require maintenance and repair to operate properly. The drive axle for a golf cart rarely fails because of the low ability of the motors. Yous may need to remove one to change the bearing or if a gear is stripped.

Step ane

Park the golf cart on a flat, solid surface. Place the bicycle chocks in front of the front wheels. Jack upwards the rear of the golf cart with the auto jack and identify two jack stands under the rear end, supporting it with the tires off the ground.

Step two

Unscrew the bolts that secure the rim on the hub. Pull off the tire and rim.

Step 3

Pull the cover off the pulsate restriction and removing the bolts securing it to the hub.

Step 4

Pull the the "C" clip out with a pair of needlenoe pliers. The clip is is visible through the hole in the flange. Pull the hub from the beam.

Step 5

Spiral the begetting puller into the center of the beam and wrap its arms around the back bearing housing. Tighten the bearing puller until the bearing is released.

Pull the axle from the golf car with your easily.

References

Tips

Things You lot'll Need

Writer Bio